Performance, durability, and versatility. Zipp checks all the boxes with its 30 Course Rim-brake Clincher wheelset. A wide 21mm internal rim profile delivers speed, stability and comfort over a variety of surfaces, and Zipp's 71/177 hubset provides smooth and efficient power transfer. Sapim CX-Ray spokes and redesigned ergonomic skewers round out this excellent all-around package. Each wheel includes rim tape, a tubeless valve, and a 1.85mm spacer for use with 10-speed cassettes.
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed
Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP. It includes the following: - Threaded axle spacer M12 x 1.75 Coarse - M12 x 1.5 Medium - M12 x 1.0 Fine - End Cap
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
This lightweight, high-pressure rim tape offers great protection against spoke hole flats and is easy to install. This Italian-made tape is light and thin, so it will not inhibit tire fitting. Nylon elastic material is used to ensure a snug fit without movement.
This Shimano HG freehub body is designed for our top level Silverton SL wheelset, which feature DT Swiss hub internals.
Rotorset to convert DT Swiss hubs to accept a Shimano XTR rotor.
Lay down Stan's Universal Kit Rim Tape before the tubeless conversion of your non-Stan's rims. It makes your rims air tight and ready for tubeless use by covering the spoke holes.
Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - ISO Diameter: 507 / 24-inch BMX - Valve: Schrader - Tire Type: Clincher
Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Keeping that well-functioning Shimano Alfine internally geared hub in top working condition means keeping the internals clean. Replace the left hub seal ring when necessary for continued performance and to preserve the longevity that you expect from Alfine.
Do you need to replace the right lock washer seal on your Alfine SG-S700 internally geared hub? If you're not sure, it might not be a bad idea, as contamination from damaged or worn seals is the kryptonite of virtually maintenance-free internally geared hubs.
Keeping contamination out of your internally geared hub is critical to its function and longevity. Sometimes, the oil port bolt comes loose and it's easy to lose, even if you've just taken it out to oil your hub. Keep a spare or two so your hub stays clean inside and it'll last you many, many miles.
New cones make hubs spin like silk. Take advantage of your Shimano Alfine hub's highly serviceable design, and replace the bearing cones if they are worn or damaged. This one is specifically for the right side.
If the bearings are getting rough on your Shimano Internally Geared hub, it could simply be a matter of replacing a pitted cone and repacking the bearing with grease. - Fits left side of Alfine SG-S700 hubs
-Replacement left side cone and locknut for Shimano 105 FH-5800 rear hub
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S7000 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S7000-8
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock. - Alfine hubs are packaged without small parts and require this kit plus a cog - Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit - For 11-Speed Hub - Includes CJ-S700 Cassette Joint for Vertical Dropouts *Cassette joint does not fit Di2 Alfine hubs
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance
The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life
- Cassette Body Type: Shimano/SRAM 11 Speed Road - Material: Steel
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
With simple setup and reliable trail performance, the Shimano Deore XT front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with spline mount and lock ring - Toolless 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance - Hole Count: 28
From World Cup DH runs to sessioning your local trails, Shimano's Saint front hub is the answer. Centered around an oversize hub shell and a 20mm thru-axle, the Saint Front Hub is rock solid, with beefy flanges and Shimano's angular contact bearings, which balance destructive impacts from any direction. And, Shimano's Centerlock Rotor Mount makes installing rotors a breeze.
$140.99 - $144.99
- Aluminum Hub Shell - Over Locknut: 100mm - Stainless Steel Ball Bearings - Spoke Hole Circle: 38mm - Center to Flange (Right): 37mm - Center to Flange (Left): 37mm - Average Weight: 203g
Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g
- Aluminum Hub Shell - Super polished Bearing Races - Over Locknut: 120mm - Stainless Steel Ball Bearings - Contact Sealing: Dust Cap - Average Weight: 298g (w/o lockring)
The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Angular contact bearings - Compact & lightweight - Low rotational resistance - Durable sealing performance
Page 1 of 2 Next page